It is known that soot or creosote covering walls, chimney and flue may be cause of fire. These mill-cake are easily flammable and to be removed, it is necessary to clean the chimney.

Modern chemical means for removal of creosote are used to prevent fires from the chimney.

The function of the briquette is based on contained in him the special active minerals, which adhere to the creosote and act as a chemical catalyst. This brings to its drying and turn the creosote into a very fragile substance.
Contents: 70% wood chips and paraffin, 30 % ammonium and copper salts.

Safety instructions: R10 flammable, S2 keep out of reach of children, S15 store away of heat source.

Weight: 0.200 kg

Size of one piece: 8.5 cm х 8.5 cm х 4.7 cm

Directions for use:
1. Make a sufficient wood fire in the stove or fireplace for good heating up of your chimney.
Wait until you obtain hot ambers and place the briquette on top, it will burn for about 40 min.
The door of the fireplace or stove should be closed and air vents completely open.




2. After the burn down of the briquette the walls of the fireplace will be colored pale grey.






3. The creosote deposits in the chimney after a short time will crack and fall down.






4. During next 1-2 weeks will continue the effect of the minerals and more creosote particles
can fall into the stove or fireplace, where will burn completely.